| ADC660
|
 |
|
|
| BR3CS
|
 |
| BRIDGER #3 COIL SPRING TRAP |
This trap is the best #3 being built today.
The #3 is very well balanced to come straight up and out of the trap bed.
A well balanced trap is so very important.
This trap has thick heavy jaws with a 6 12" jaw spread, outside to outside adjustable oblong pan, heavy base, high levers, and center swiveled.
12" chain with 4-way swivel on end of 4 mm. straight link chain.
Comes with a long spring pin for easy four-coiling, also gives trap more balance when set.
This trap is excellent for bobcat, coyote, beaver and otter.
4-coiled this trap makes an excellent beaver trap.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR3CSOS
|
 |
| BRIDGER #3 COIL SPRING OFFSET TRAP |
This trap is the best #3 being built today.
The #3 is very well balanced to come straight up and out of the trap bed.
A well balanced trap is so very important.
This trap has thick heavy jaws with a 6 12" jaw spread, outside to outside adjustable oblong pan, heavy base, high levers, and center swiveled.
12" chain with 4-way swivel on end of 4 mm. straight link chain.
Comes with a long spring pin for easy four-coiling, also gives trap more balance when set.
This trap is excellent for bobcat, coyote, beaver and otter.
4-coiled this trap makes an excellent beaver trap.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR4LS
|
 |
| BRIDGER #4 LONG SPRING TRAP |
This trap has a 6" jaw spread, thick jaws, and heavy base, strong springs.
It is a very strong and fast trap. Good for beaver, coyotes and etc. This trap comes in regular jaws only. It also comes with large ring on end of 12" chain and an adjustable pan.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR5CS
|
 |
| BRIDGER #5 COIL SPRING FOUR COIL TRAP |
New and Improved Bridger #5 Coilspring.
7 1/4" inside jaw spread
7 3/4" outside jaw spread
Round jaws
Four coiled for beaver and otter
Minnnesota completely rebuilt this trap. The new features on this trap include a much heavier dog with night latch and a zinc plated bolt with nylon lock nut to keep your pan tension where you want it catch after catch. They also upgraded the swivel and J-Hooks, added a "spring keeper" to keep the 4-coil springs where they belong, and placed a steel spacer between the pan posts to allow you to tighten the pan tension to your desired level.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR5CSOS
|
 |
| BRIDGER #5 COIL SPRING OFFSET TRAP |
New and Improved Bridger #5 Coilspring Offset
7 1/4" inside jaw spread
7 3/4" outside jaw spread
Round jaws
Four coiled for beaver and otter
Minnnesota completely rebuilt this trap. The new features on this trap include a much heavier dog with night latch and a zinc plated bolt with nylon lock nut to keep your pan tension where you want it catch after catch. They also upgraded the swivel and J-Hooks, added a "spring keeper" to keep the 4-coil springs where they belong, and placed a steel spacer between the pan posts to allow you to tighten the pan tension to your desired level.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR5LS
|
 |
| BRIDGER #5 LONGSPRING TRAP |
The # 5 SPECIAL BRIDGER LONG-SPRING TRAP has a 7 1/2 inch outside to outside jaw spread, heavy base plate, excellent heavy jaws and springs, heavy duty drowner lock on end of 12" 5 mm straight link chain.
This is the best beaver leg hold trap for the money on the market today.
This trap is excellent for beaver, otter, coyotes, also wolves and cougar where it is legal.
This trap can be set while standing on a beaver dam or in the water.
It has more base, easy to bed.
You do not have to reach in jaws to set, has adjustable round pan.
We are now having our springs made in Taiwan, heat-treated and assembled in the U.S. |
|
|
|
|
|
|
|
|
|
|
| MB750
|
 |
| MINNESOTA #750 REGULAR COIL SPRING TRAP |
Check out these features of the MB-750 Beaver Trap: 7 1/4" jaw spread, 4 coiled for strength, speed and stability.
Both jaws held down by a special trigger system preventing beaver and otter from flipping up the loose jaw.
Compact - extremely easy to bed in tight areas.
Perfect for under ice platform sets. Heavy-duty frame with an additional 3/16" base plate and D-ring.
Heavy #10 brass bolt and nut for easy pan tension adjustment.
Extra-heavy chain with MB Crunch Proof swivels at D-ring and chains' end.
And most important, manufactured and custom assembled by trappers!
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| MB750L
|
 |
| MINNESOTA #750 LAMINATED COIL SPRING TRAP |
MB-750 Beaver (Laminated Regular Jaw)
Check out these features of the MB-750 Beaver trap: 7 1/4" jaw spread. 4-coiled for strength, speed and stability.
Both jaws held down by a special trigger system preventing beaver and otter from flipping up the loose jaw.
Compact - extremely easy to bed in tight areas.
Perfect for under ice platform sets.
Heavy-duty frame with an additional 3/16" baseplate and D-ring.
Heavy #10 brass bolt and nut for easy pan tension adjustment.
Extra-heavy chain with MB Crunch Proof swivels at D-ring and chains' end. And most important, manufactured and custom assembled by trappers.
Made in Minnesota with pride!
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| MB1216
|
 |
| MINNESOTA #1216 BODY GRIP BEAVER TRAP |
The MB-1216-JC is the first of the Minnesota Brand line of heavy duty body grip traps and it's a whopper. An excellent beaver trap!
The Megabear has the strongest springs on the market and is the only body grip trap with full 3/8'' jaws and striker bars.
We've installed some Minnesota Brand safety hooks that stay where you put them along with a tension adjustable trigger.
The Megabear is extra heavy duty from top to bottom and assembled with 100% U.S.A. parts and components.
As with all large body grip traps we strongly encourage the use of a body grip safety gripper for personal safety.
We have found the Sleepy Creek saftey fits best for this trap.
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| DU3CS
|
 |
|
|
| DU4CS4X
|
 |
|
|
| DU280BG
|
 |
|
|
| DU330BG
|
 |
|
|
| DU330BGM
|
 |
| DUKE #330 BODY GRIP MAGNUM TRAP |
10" jaw spread.
For beaver, otter, coyote and bobcat.
Magnum traps have a bend in the corners to create a complete closure when the trap is fired. |
|
|
|
|
|
|
|
|
|
|
| DU5LS
|
 |
|
|
| BR330BG
|
 |
| BRIDGER #330 BODY GRIP TRAP |
The 330 Body-Gripper are strong springed with an excellent dog and trigger system.
The 10” x 10” Body Gripper is built so that the spring has a full thrust.
Excellent for beaver, fisher, otter, etc.
>
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| SC412LS
|
 |
| SLEEPY CREEK # 4 1/2 LONG SPRING TRAP |
• Frame - 2 pc, 3/16" thick x 1-¼ wide. Chain is center mounted with reinforced chain strap & 1¼ D-Ring
• Cross - 1-piece 3/16" thick with staked pan post.
• Standard Jaw - 7-½" spread. ¼" thick x ¾" wide.
• Chain - 3/16 Proof Coil Chain, w/3 swivel points (welded "J" hooks)
• Pan - Straddle Pan with extra gussets for strength and visual Dog Engagement with a Stainless Steel Crimped Bolt & Brass Nut.
• Springs - 10 gauge Heavy Duty, Heat-treated Spring Steel, Purposely made it fold inside the frame for easy carrying.
• Weight - 4 pounds 7 ounces
The Newest Addition to the SCM Trapline
Target Species - Beaver, Wolf & Mountain Lion
MADE AND ASSEMBLED IN THE USA!!
Sleepy Creek is a very high quality trap.
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| SC700BG
|
 |
| SLEEPY CREEK #700 BODY GRIP TRAP |
• Jaw - 7" spread (220); .250 diameter wire welded at rivet point.
• Trigger - 1/18" thick steel clip with .090 diameter wire riveted in the center.
• Dog - 1/8" thick steel.
• Double Spring - Heavy duty .250 diameter spring wire with two safety hooks.
• Chain - #1/0 double link with two swivel points.
• Weight - 2 pounds 5.44 ounces
Target Species: Beaver, Badager, Fisher, Marten, Nutria, Opossum, Otter, Raccoon and Skunk.
MADE AND ASSEMBLED IN THE USA!!
Sleepy Creek is a very high quality trap.
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| BR280BGM
|
 |
| BRIDGER #280 BODY GRIP MAGNUM TRAP |
The Bridger #280 Magnum measures a full 8" x 8" and gives you an excellent Magnum Trap. Extensive field testing resulted in this unique design with complete corner closure. A slight center gap is incorporated to protect the integrity of the dog and trigger in the event of a dry fire. Designed and developed for the serious beaver and otter trapper.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| SC1000BG
|
 |
| SLEEPY CREEK #1000 BODY GRIP TRAP |
• Jaw - 10" spread (330); .312 diameter wire welded at rivet point.
• Trigger - 1/18" thick steel clip with .090 diameter wire riveted in the center.
• Dog - 1/8" thick steel.
• Double Spring - Heavy duty .312 diameter spring wire.
• Safety Hooks - .136 diameter wire.
• Weight - 4 pounds 6 ounces
Target Species: Beaver, Bobcat, Lynx and Otter.
MADE AND ASSEMBLED IN THE USA!!
Sleepy Creek is a very high quality trap.
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| BEL280
|
 |
|
|
| BEL330
|
|
| BELISLE 330 BODY GRIP TRAP |
- 10" Jaw Spread
- Beaver, Otter, Wolverine, Coyote, Cat,
- Two Springs
- Very high quality trap made in Canada |
|
|
|
|
|
|
|
|
|
|
