| BR2CS
|
 |
| BRIDGER #2 COIL SPRING TRAP |
The #2 Coil-Spring has thick, square jaws with a 5 7/8" jaw spread outside to outside.
Adjustable pan, heavy base, high levers, and center swiveled.
12" chain with 4-way swivel on end of 4 mm chain, has a longer spring pin for easy four-coiling ,also gives trap better balance when set.
This trap is excellent for fox, coyotes, bobcats, and raccoon.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR2CSOS
|
 |
| BRIDGER #2 COIL SPRING OFFSET JAWS TRAP |
The #2 Coil-Spring has thick, square jaws with a 5 7/8" jaw spread outside to outside.
Adjustable pan, heavy base, high levers, and center swiveled.
12" chain with 4-way swivel on end of 4 mm chain, has a longer spring pin for easy four-coiling ,also gives trap better balance when set.
This trap is excellent for fox, coyotes, bobcats, and raccoon.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR3CS
|
 |
| BRIDGER #3 COIL SPRING TRAP |
This trap is the best #3 being built today.
The #3 is very well balanced to come straight up and out of the trap bed.
A well balanced trap is so very important.
This trap has thick heavy jaws with a 6 12" jaw spread, outside to outside adjustable oblong pan, heavy base, high levers, and center swiveled.
12" chain with 4-way swivel on end of 4 mm. straight link chain.
Comes with a long spring pin for easy four-coiling, also gives trap more balance when set.
This trap is excellent for bobcat, coyote, beaver and otter.
4-coiled this trap makes an excellent beaver trap.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR3CSOS
|
 |
| BRIDGER #3 COIL SPRING OFFSET TRAP |
This trap is the best #3 being built today.
The #3 is very well balanced to come straight up and out of the trap bed.
A well balanced trap is so very important.
This trap has thick heavy jaws with a 6 12" jaw spread, outside to outside adjustable oblong pan, heavy base, high levers, and center swiveled.
12" chain with 4-way swivel on end of 4 mm. straight link chain.
Comes with a long spring pin for easy four-coiling, also gives trap more balance when set.
This trap is excellent for bobcat, coyote, beaver and otter.
4-coiled this trap makes an excellent beaver trap.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR5CS
|
 |
| BRIDGER #5 COIL SPRING FOUR COIL TRAP |
New and Improved Bridger #5 Coilspring.
7 1/4" inside jaw spread
7 3/4" outside jaw spread
Round jaws
Four coiled for beaver and otter
Minnnesota completely rebuilt this trap. The new features on this trap include a much heavier dog with night latch and a zinc plated bolt with nylon lock nut to keep your pan tension where you want it catch after catch. They also upgraded the swivel and J-Hooks, added a "spring keeper" to keep the 4-coil springs where they belong, and placed a steel spacer between the pan posts to allow you to tighten the pan tension to your desired level.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| BR5CSOS
|
 |
| BRIDGER #5 COIL SPRING OFFSET TRAP |
New and Improved Bridger #5 Coilspring Offset
7 1/4" inside jaw spread
7 3/4" outside jaw spread
Round jaws
Four coiled for beaver and otter
Minnnesota completely rebuilt this trap. The new features on this trap include a much heavier dog with night latch and a zinc plated bolt with nylon lock nut to keep your pan tension where you want it catch after catch. They also upgraded the swivel and J-Hooks, added a "spring keeper" to keep the 4-coil springs where they belong, and placed a steel spacer between the pan posts to allow you to tighten the pan tension to your desired level.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
Made in Taiwan |
|
|
|
|
|
|
|
|
|
|
| DULT1114
|
 |
|
|
| MB450OS
|
 |
| MINNESOTA #450 COIL SPRING OFFSET TRAP |
Can be used for coyote, bobcat, fox and raccoon.
The MB-450-OS has a Paws-I-Trip Pan system with the night latched dog, heavy levers, music wire springs, crunch proof swivels, and a 2 piece gusseted frame for strength and reliability.
The trap that the live catch market has been waiting for.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| MB550
|
 |
| MINNESOTA #550 COIL SPRNG TRAP |
The 550-RC has an outside jaw spread of 5 1/2" and an inside jaw spread of 4 3/4".
The cast jaw face is 3/8" thick and the offset is 3/16".
We've installed a Paws-I-Trip pan system and night latch dog.
Pan tension out of the box (un-waxed) on the two coiled version runs an average of 2.1 pounds which we have found to be a very good number for a multi species trap.
Pan tension on the four coiled model runs an average of 3.1 pounds.
Tested extensively over a three year period on coyote, bobcat, red fox, grey fox, and raccoon.
This trap is fast and excellent results were obtained using it two coiled.
We do not recommend using the 4-coiled version if grey fox is your target animal.
The 550 is an excellent live market trap as well as the trap to use on a mixed species line.
Small enough for fox and tough enough for the nastiest coyote
If you are not planning on 4-coiling your MB-550-RC's we strongly recommend cutting the excess spring pins off leaving 1/2" protruding from the frame.
We personally (along with many of our customers who have used the 550) prefer underalls to pan covers for this trap.
The underalls increase the pan tension slightly resulting in full pad or foot catches and the number of snapped traps is reduced to near zero.
We have obtained excellent results on grey fox with the 2-coiled 550 and underalls.
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| MB550OS
|
|
| MINNESOTA #550 COIL SPRING OFFSET 2-COIL TRAP |
5 1/2" Jaw Spread
Can be used for coyote, bobcat, fox and raccoon.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| MB550RJ
|
 |
|
|
| MB650OS
|
 |
|
|
| MB650L
|
 |
| MINNESOTA #650 COIL SPRING TRAP WITH OUTSIDE LAMINATED JAWS |
Just dye and wax these traps and they're ready to go!
Virtually anything that you could possibly want done to a trap to make it coyote proof is wrapped up here in one neat package.
The MB-650 is heavy duty from top to bottom and comes with 1/4" offset jaws and a 6 1/8" inside jaw spread and outside laminated (O.L.) jaws with 3/16" lamination strips.
The MB-650 is 4-coiled, base plated, center swiveled and has an extra heavy duty oversized pan which provides for a huge kill area.
The pan tension is adjustable with a #10 brass pan bolt.
Both heavy jaws are held down by the trigger system which will keep any animal from flipping up a loose jaw.
The dog has a "step-down" notch milled into it that gives you an audible click when you're lowering the pan.
We've of course installed our MB Crunch Proof Swivels and heavy duty American-made chain to top it off.
* The MB-650, designed by trappers for trappers with animal comfort in the forefront *
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| MB650C
|
 |
| MINNESOTA #650 COIL SPRING TRAP WITH MALLEABLE CAST JAWS |
Our new MB-650-C has the same adjustable pan system and the same heavy duty springs, chain, and swivels as our original MB-650.
The similarities stop at the jaws however as the MB-650-C sports super heavy 3/8" thick, 1/4" offset positive locking malleable cast jaws.
The inside jaw spread is 5 7/8".
A real coyote machine!
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| MB650RJ
|
 |
| MINNESOTA #650 COIL SPRING 4 COIL RUBBER JAW TRAP |
The MB-650-RJ is heavy duty from top to bottom and comes with 1/4" offset jaws and a 6 7/8" outside jaw spread and 5 7/8" inside jaw spread.
The MB-650-RJ is 4-coiled, base plated, center swiveled and has an extra heavy duty oversized pan which provides for a huge kill area.
The pan tension is adjustable with a #10 brass pan bolt.
Both heavy jaws are held down by the trigger system which will keep any animal from flipping up a loose jaw.
The dog has a "step-down" notch milled into it that gives you an audible click when you're lowering the pan.
We've of course installed our MB Crunch Proof Swivels and heavy duty American-made chain to top it off.
* The MB-650, designed by trappers for trappers with animal comfort in the forefront *
Made In The
U
S
A
|
|
|
|
|
|
|
|
|
|
|
| DU134CS
|
 |
|
|
| DU2CS
|
 |
|
|
| DU2CSOS
|
 |
| DUKE #2 COIL SPRING OFFSET JAWS TRAP |
5 1/2" jaw spread, off set jaws.
For bobcat, coyote and lynx.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
|
|
|
|
|
|
|
|
|
|
|
| DU3CS
|
 |
|
|
| DU3CSOS
|
 |
| DUKE #3 COIL SPRING OFFSET JAWS TRAP |
6" jaw spread.
For bobcat, coyote and lynx.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power. |
|
|
|
|
|
|
|
|
|
|
| DU3CSRJ
|
 |
|
|
| DU4CSRJ4X
|
 |
|
|
| DU134CS4X
|
 |
|
|
| DU134CSOS4
|
 |
| DUKE #1 3/4 FOUR COIL OFFSET TRAP |
5 1/4" Jaw spread.
For bobcat, coyote, and fox.
This Duke trap is four coiled and the jaws are offset.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power. |
|
|
|
|
|
|
|
|
|
|
| DU4CS4X
|
 |
|
|
