The 660 is a 28" wide modified 330 extended with a solid rod.
Any wide gaps beaver swim through are now set locations with the 660 Superbear.
An innovative product designed by Richard Kaspar of Crete, NE.
Price per each
Made In The
U
S
A
This trap is the best #3 being built today.
The #3 is very well balanced to come straight up and out of the trap bed.
A well balanced trap is so very important.
This trap has thick heavy jaws with a 6 12" jaw spread, outside to outside adjustable oblong pan, heavy base, high levers, and center swiveled.
12" chain with 4-way swivel on end of 4 mm. straight link chain.
Comes with a long spring pin for easy four-coiling, also gives trap more balance when set.
This trap is excellent for bobcat, coyote, beaver and otter.
4-coiled this trap makes an excellent beaver trap.
Made in Taiwan
This trap is the best #3 being built today.
The #3 is very well balanced to come straight up and out of the trap bed.
A well balanced trap is so very important.
This trap has thick heavy jaws with a 6 12" jaw spread, outside to outside adjustable oblong pan, heavy base, high levers, and center swiveled.
12" chain with 4-way swivel on end of 4 mm. straight link chain.
Comes with a long spring pin for easy four-coiling, also gives trap more balance when set.
This trap is excellent for bobcat, coyote, beaver and otter.
4-coiled this trap makes an excellent beaver trap.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
Made in Taiwan
This trap has a 6" jaw spread, thick jaws, and heavy base, strong springs.
It is a very strong and fast trap. Good for beaver, coyotes and etc. This trap comes in regular jaws only. It also comes with large ring on end of 12" chain and an adjustable pan.
Made in Taiwan
New and Improved Bridger #5 Coilspring.
7 1/4" inside jaw spread
7 3/4" outside jaw spread
Round jaws
Four coiled for beaver and otter
Minnnesota completely rebuilt this trap. The new features on this trap include a much heavier dog with night latch and a zinc plated bolt with nylon lock nut to keep your pan tension where you want it catch after catch. They also upgraded the swivel and J-Hooks, added a "spring keeper" to keep the 4-coil springs where they belong, and placed a steel spacer between the pan posts to allow you to tighten the pan tension to your desired level.
Made in Taiwan
The 330 Body-Gripper are strong springed with an excellent dog and trigger system.
The 10” x 10” Body Gripper is built so that the spring has a full thrust.
Excellent for beaver, fisher, otter, etc.
>
Made in Taiwan
New and Improved Bridger #5 Coilspring Offset
7 1/4" inside jaw spread
7 3/4" outside jaw spread
Round jaws
Four coiled for beaver and otter
Minnnesota completely rebuilt this trap. The new features on this trap include a much heavier dog with night latch and a zinc plated bolt with nylon lock nut to keep your pan tension where you want it catch after catch. They also upgraded the swivel and J-Hooks, added a "spring keeper" to keep the 4-coil springs where they belong, and placed a steel spacer between the pan posts to allow you to tighten the pan tension to your desired level.
Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
Made in Taiwan
The # 5 SPECIAL BRIDGER LONG-SPRING TRAP has a 7 1/2 inch outside to outside jaw spread, heavy base plate, excellent heavy jaws and springs, heavy duty drowner lock on end of 12" 5 mm straight link chain.
This is the best beaver leg hold trap for the money on the market today.
This trap is excellent for beaver, otter, coyotes, also wolves and cougar where it is legal.
This trap can be set while standing on a beaver dam or in the water.
It has more base, easy to bed.
You do not have to reach in jaws to set, has adjustable round pan.
Springs made in Taiwan, heat-treated and assembled in the U.S.A.
Check out these features of the MB-750 Beaver Trap: 7 1/4" jaw spread, 4 coiled for strength, speed and stability.
Both jaws held down by a special trigger system preventing beaver and otter from flipping up the loose jaw.
Compact - extremely easy to bed in tight areas.
Perfect for under ice platform sets. Heavy-duty frame with an additional 3/16" base plate and D-ring.
Heavy #10 brass bolt and nut for easy pan tension adjustment.
Extra-heavy chain with MB Crunch Proof swivels at D-ring and chains' end.
And most important, manufactured and custom assembled by trappers!
Made In The
U
S
A
MB-750 Beaver (Laminated Regular Jaw)
Check out these features of the MB-750 Beaver trap: 7 1/4" jaw spread. 4-coiled for strength, speed and stability.
Both jaws held down by a special trigger system preventing beaver and otter from flipping up the loose jaw.
Compact - extremely easy to bed in tight areas.
Perfect for under ice platform sets.
Heavy-duty frame with an additional 3/16" baseplate and D-ring.
Heavy #10 brass bolt and nut for easy pan tension adjustment.
Extra-heavy chain with MB Crunch Proof swivels at D-ring and chains' end. And most important, manufactured and custom assembled by trappers.
Made in Minnesota with pride!
Made In The
U
S
A
The MB-1216-JC is the first of the Minnesota Brand line of heavy duty body grip traps and it's a whopper. An excellent beaver trap!
The Megabear has the strongest springs on the market and is the only body grip trap with full 3/8'' jaws and striker bars.
We've installed some Minnesota Brand safety hooks that stay where you put them along with a tension adjustable trigger.
The Megabear is extra heavy duty from top to bottom and assembled with 100% U.S.A. parts and components.
As with all large body grip traps we strongly encourage the use of a body grip safety gripper for personal safety.
We have found the Sleepy Creek saftey fits best for this trap.
Made In The
U
S
A
• Frame - Two-piece construction, 1/8" thick x 7/8" wide and riveted.
• Pan Post - Welded through the cross.
• Jaw - 4-15/16" spread.
• Chain - #2/0 double link with one swivel point, ring and drowner.
• Springs - Heavy duty, heat-treated spring steel.
• Pan - Two-piece construction with crimped bolt and nut.
• Weight - 1 pound 6.24 ounces
Target Species: Nutria, Raccoon, Fox, Fisher, Beaver and Otter. MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Frame - Two-piece, 1/8" thick x 1" wide with reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gussetted pan post with a hole for an adjustable pan stop.
• Standard Jaw - 5-13/16" spread, 5/32" x 9/16" with corner radius to prevent cutting.
• Chain - #2 machine chain twist link, center mounted with three swivel points.
• Pan - One-piece construction with visual dog engagement and crimped bolt and nut.
• Springs - Heavy duty 8-gauge spring wire.
• Levers - Heavy duty .090" thick steel set at a 60-degree angle.
• Weight - 2 pounds .32 ounces
Target Species: Badger, Beaver, Bobcat, Coyote and Lynx. MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Frame - Two-piece, 1/8" thick x 1" wide with reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gussetted pan post with a hole for an adjustable pan stop.
• Offset Jaw - 6" spread, the face averages nearly twice that of the standard jaw. Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
• Chain - #2 machine chain twist link, center mounted with three swivel points.
• Pan - One-piece construction with visual dog engagement and crimped bolt and nut.
• Springs - Heavy duty 8-gauge spring wire.
• Levers - Heavy duty .090" thick steel set at a 60-degree angle.
• Weight - 2 pounds .32 ounces
Target Species: Badger, Beaver, Bobcat, Coyote and Lynx. MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Frame - Two-piece construction, 1/8" thick x 1" wide; reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gusseted pan post with a hole for an adjustable pan stop.
• Standard Jaw - 5-13/16" spread. 5/32" x 9/16" with corner radius to prevent cutting.
• Chain - #2 machine chain, twist link, center mounted with 3 swivel points.
• Springs - Heavy duty, heat-treated spring steel.
• Pan - One-piece construction with visual dog engagement and crimped stainless steel bolt and brass nut.
• Weight - 2 pounds 4 ounces
Target Species: Badger, Beaver, Bobcat, Coyote and Lynx. MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Frame - Two-piece construction, 1/8" thick x 1" wide; reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gusseted pan post with a hole for an adjustable pan stop.
• Offset Jaw - 6" spread. Face averages nearly twice that of the standard jaw. Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
• Chain - #2 machine chain, twist link, center mounted with 3 swivel points.
• Springs - Heavy duty, heat-treated spring steel.
• Pan - One-piece construction with visual dog engagement and crimped stainless steel bolt and brass nut.
• Weight - 2 pounds 4 ounces
Target Species: Badger, Beaver, Bobcat, Coyote and Lynx.
MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Frame - 2 pc, 3/16" thick x 1-¼ wide. Chain is center mounted with reinforced chain strap & 1¼ D-Ring
• Cross - 1-piece 3/16" thick with staked pan post.
• Standard Jaw - 7-½" spread. ¼" thick x ¾" wide.
• Chain - 3/16 Proof Coil Chain, w/3 swivel points (welded "J" hooks)
• Pan - Straddle Pan with extra gussets for strength and visual Dog Engagement with a Stainless Steel Crimped Bolt & Brass Nut.
• Springs - 10 gauge Heavy Duty, Heat-treated Spring Steel, Purposely made it fold inside the frame for easy carrying.
• Weight - 4 pounds 7 ounces
The Newest Addition to the SCM Trapline
Target Species - Beaver, Wolf & Mountain Lion MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Frame - 2 pc, 3/16" thick x 1-¼ wide. Chain is center mounted with reinforced chain strap & 1¼ D-Ring
• Cross - 1-piece 3/16" thick with staked pan post.
• Offset Jaw - 7-½" spread. ¼" thk x ¾" wide with 1/8" cut in offset.
• Chain - 3/16 Proof Coil Chain, w/3 swivel points (welded "J" hooks)
• Pan - Straddle Pan with extra gussets for strength and visual Dog Engagement with a Stainless Steel Crimped Bolt & Brass Nut
• Springs - 10 gauge Heavy Duty, Heat-treated Spring Steel, Purposely made it fold inside the frame for easy carrying.
• Weight - 4 pounds 7 ounces
The Newest Addition to the SCM Trapline
Target Species - Beaver, Wolf & Mountain Lion MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Frame - Two-piece, 1/8" thick x 1" wide with reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gusseted pan post with a hole for an adjustable pan stop.
• Standard Jaw - 6-5/16" spread, 5/32" x 9/16" with corner radius to prevent cutting.
• Chain - #2 machine chain twist link, center mounted with three swivel points.
• Pan - One-piece construction with visual dog engagement and crimped bolt and nut.
• Springs - Heavy duty 8-gauge spring wire.
• Levers - Heavy duty .090" thick steel set at a 60-degree angle.
• Weight - 2 pounds 1.25 ounces
Standard Jaw
Target Species: Badger, Beaver, Bobcat, Coyote, Lynx and Otter. MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Frame - Two-piece, 1/8" thick x 1" wide with reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gusseted pan post with a hole for an adjustable pan stop.
• Offset Jaw - 6-1/2" spread. The face averages nearly twice that of the standard jaw. Offset jaws have a slight gap in the jaws. This allows the spring levers to close further when the animal is caught to create more holding power.
• Chain - #2 machine chain twist link, center mounted with three swivel points.
• Pan - One-piece construction with visual dog engagement and crimped bolt and nut.
• Springs - Heavy duty 8-gauge spring wire.
• Levers - Heavy duty .090" thick steel set at a 60-degree angle.
• Weight - 2 pounds 1.25 ounces
Offset Jaw
Target Species: Badger, Beaver, Bobcat, Coyote, Lynx and Otter.
MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Frame - Two-piece construction, 1/8" thick x 1" wide; reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gusseted pan post with a hole for an adjustable pan stop.
• Standard Jaw - 6-5/16" spread. 5/32" x 9/16" with corner radius to prevent cutting.
• Chain - #2 machine chain, twist link, center mounted with 3 swivel points.
• Springs - Heavy duty, heat-treated spring steel.
• Pan - One-piece construction with visual dog engagement and crimped stainless steel bolt and brass nut.
• Weight - 2 pounds 6.56 ounces
Target Species: Badger, Beaver, Bobcat, Coyote, Lynx and Otter. MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
• Jaw - 7" spread (220); .250 diameter wire welded at rivet point.
• Trigger - 1/18" thick steel clip with .090 diameter wire riveted in the center.
• Dog - 1/8" thick steel.
• Double Spring - Heavy duty .250 diameter spring wire with two safety hooks.
• Chain - #1/0 double link with two swivel points.
• Weight - 2 pounds 5.44 ounces
Target Species: Beaver, Badager, Fisher, Marten, Nutria, Opossum, Otter, Raccoon and Skunk. MADE AND ASSEMBLED IN THE USA!! Sleepy Creek is a very high quality trap.
Made In The
U
S
A
