| TL503
|
|
 |
| ANCHOR DRIVER |
24" Long, with a welded T-handle.
This is the best design avalible anywhere built very sturdy.
Can be used with (Iowa) Earth Anchors, and Bullet Point Super Stakes |
|
|
|
|
|
|
|
|
|
|
| TL504
|
|
|
| WATER DRIVER |
48" Long, welded T-Handle. Great for water trappers.
Will work with (Iowa) Earth Anchors, and Bullet Point Super Stakes. |
|
|
|
|
|
|
|
|
|
|
| TL511
|
|
|
| HEAVY DUTY POGO DRIVER |
"Longliner" 34" long made with a 5/8" shaft and a yellow T handle.
Will only work for Pogo Anchors |
|
|
|
|
|
|
|
|
|
|
| TL518
|
|
|
|
| TL519
|
|
|
| "PREDATOR" POGO DRIVER |
Used to pound in the standard and softground pogo anchors.
Red T bar handle.
1 - Slide the J-Hook and washer into the goove in the tip of the driver.
2 - Pound anchor into ground and remove driver.
3 - Give anchor cable a tug to straighen out the washer in the ground.
|
|
|
|
|
|
|
|
|
|
|
| TL517
|
|
|
| POGO DRIVER WELD ON TIP |
Use to customize your own driver.
Heavy duty version is 6 inches long and 5/8" wide.
Standard version is 6 inches long and 1/2" wide. |
|
|
|
|
|
|
|
|
|
|
| TH428
|
|
|
| DRIVER FOR BERKSHIRE STAKES |
| This driver is 20" long and can be used with the Berkshire Disposable Stake, the Heavy Duty Disposable Stakes. |
|
|
|
|
|
|
|
|
|
|
| TH433
|
|
|
|
| TL602
|
|
|
| 24" DUCKBILL DRIVER |
24" long made with 3/8" steel with a lathe end to fit Duckbills.
Will only work with Duckbill Anchors. |
|
|
|
|
|
|
|
|
|
|
